GPIO( General Purpose IO) is the most basic method of communication between MCU and external world. These are done with what is called a PORT. Ports are nothing but a set of bits physically connected to PINs of Microcontroller and available outside the chip. As we are working on [...]

Hello Friends, Welcome back. In the last tutorial we started working with MPLab and HI-TECH C Compiler and written our first C program to blink LED. After compiling the program we got the HEX file. Now, in this tutorial we will see how to transfer(burn) the hex file to [...]

Hello friends, welcome to this exciting tutorial were we will begin our journey with latest PIC18F micros from Microchip Technologies. This tutorial will give you information on what software/hardware you will require and basic steps on how to get, install, configure and use them. After going through [...]

Good News for PIC lovers ! Presenting eXtreme Burner PIC, USB Programmer for PIC18FXXXX/PIC18LFXXXX/PIC16FXXXA/PIC16LFXXXA series MCUs. This easy to use programmer with USB connectivity and GUI software can program more than 52 chips of PIC18F/PIC16F family. This programmer support both ZIF socket and ICSP based programming. [...]