May-27th-2009

PIC Development Board – Expansion of Board

The PIC Development board from eXtreme Electronics has the feature of connecting add-on boards, like user interface board or a motor controller board. You can also make your own expansion board. Actually the board has the ability [...]

May-25th-2009

PIC Development Board – Hello World Project

Hello friends, welcome to this exciting tutorial were we will begin our journey with latest PIC18F micros from Microchip Technologies. This tutorial will give you information on what software/hardware you will require and basic steps on how [...]

May-25th-2009

PIC Development Board – Programming

The PIC Development Board can be easily programmed INCircuit by using our eXtreme Burner - PIC, a PIC Programmer with USB Connectivity. The firmware of a Microcontroller is normally stored in HEX files. This [...]

May-24th-2009

PIC Development Board – Introduction

Thanks for selecting PIC development board from eXtreme Electronics. Now lets get familiar with this powerful and easy to use system. Introduction This board will help you build and test any project with PIC microcontroller [...]

Apr-25th-2009

General Purpose Digital IO with PIC Microcontrollers.

GPIO( General Purpose IO) is the most basic method of communication between MCU and external world. These are done with what is called a PORT. Ports are nothing but a set of bits physically connected to PINs of Microcontroller and available outside the chip. As we are working on [...]

Apr-21st-2009

Hello World Project With PIC Microcontroller – Part II

Hello Friends, Welcome back. In the last tutorial we started working with MPLab and HI-TECH C Compiler and written our first C program to blink LED. After compiling the program we got the HEX file. Now, in this tutorial we will see how to transfer(burn) the hex file to [...]

Apr-19th-2009

Hello World Project With PIC Microcontroller – Part I

Hello friends, welcome to this exciting tutorial were we will begin our journey with latest PIC18F micros from Microchip Technologies. This tutorial will give you information on what software/hardware you will require and basic steps on how to get, install, configure and use them. After going through [...]

Apr-14th-2009

USB PIC Microcontroller Programmer.

Good News for PIC lovers ! Presenting eXtreme Burner PIC, USB Programmer for PIC18FXXXX/PIC18LFXXXX/PIC16FXXXA/PIC16LFXXXA series MCUs. This easy to use programmer with USB connectivity and GUI software can program more than 52 chips of PIC18F/PIC16F family. This programmer support both ZIF socket and ICSP based programming. [...]

Mar-14th-2009

Tutorial 0 – Getting Started with Microchip PIC Microcontrollers.

After my tutorial series on Atmel AVR Microcontrollers and I have planed to start a similar tutorial series on Microchip PIC Microcontrollers. PIC Family of Micros are popular among hobbyists as they are easily available, easy to use and are low cost. In the first couple of tutorial [...]

Comments

    • wlewis: @Av.. To my knowledge, practically all the non-ic humidity sensors are frequency dependant...
    • wlewis: @Av.. about ADC.. how about a tutorial that does a 10bit conversion?
    • wlewis: @Av I have a great idea for a tutorial… sensors which output are measured by frequency....
    • BoB: Hello… I’m still a newbie in this field..so, may I ask…this application used...
    • Hill: Why dont you mention in your URL which PICs these burner supports? It will help avoid guesswork...
    • victor: I have to rectify, that is not an issue, instead is a LCD’s McU limitation in locations...
    • wlewis: Avrdude code for atmega32 // 16mhz crystal // Jtag disabled. avrdude -p m32 -b 19200 -P COM3...

Video

  • Comments

    • wlewis: @Av.. To my knowledge, practically all the non-ic humidity sensors are frequency dependant...
    • wlewis: @Av.. about ADC.. how about a tutorial that does a 10bit conversion?
    • wlewis: @Av I have a great idea for a tutorial… sensors which output are measured by frequency....
    • BoB: Hello… I’m still a newbie in this field..so, may I ask…this application used...
    • Hill: Why dont you mention in your URL which PICs these burner supports? It will help avoid guesswork...
    • victor: I have to rectify, that is not an issue, instead is a LCD’s McU limitation in locations...
    • wlewis: Avrdude code for atmega32 // 16mhz crystal // Jtag disabled. avrdude -p m32 -b 19200 -P COM3...